The post Sonin Digital Moisture Meter 50270 appeared first on Sonin Online Store.

The post Sonin LED Moisture Test Tool 50210 appeared first on Sonin Online Store.

Dual reading scale gives relative (1-10) & moisture percentages 10-28% readings

Contact probes are on a 3′ coiled cable for detecting moisture in hard to reach spots.

The 10 point scale corresponds to moisture levels from 10-28%. Scale and reference chart correlate relative and moisture percentage readings.

Great for Inspectors, Contactors & Homeowners

Find out if potentially damaging excess moisture is present

Test hard or softwood, concrete, plaster, carpet & more to determine the extent of moisture problems.

Locate and trace roof leaks & water seepage; assess the extent of wet rot & hidden condensation.

Use it to check surfaces before painting, wallpapering or laying floors or tile.

It helps you to select drier lumber.

Requires one 9 volt battery (not included).

Instruction sheet included

The post Sonin Analog Moisture Meter 50211 appeared first on Sonin Online Store.

The post Sonin Digital Moisture Meter 50218 appeared first on Sonin Online Store.

Reference Guide

Product Brochure

Detects water and sounds loud 110 dB alarm

Sensor and alarm can be placed up to 6 feet apart

New! The sensor has both suction cup and adhesive to secure in place

New! Includes wall mounting hardware

New! Install battery easily with slide and snap cover

New! Space-saving design

Circuit test/reset button ensures the system is working

Low battery signal tells the user when it’s time to replace the battery

Warns of leaks and overflows in the bath, kitchen, laundry, attic, basement, or anywhere there is a potential for leaks to occur.

Alerts user within hearing range that water has reached the desired level when used to monitor the filling of pools, tubs, sinks, aquariums and more

An ideal backup system for sump and bilge pumps in residential, commercial and marine applications

For leak detection:
Just place the sensor at the lowest point of the floor or other horizontal surface where water collects. The new adhesive tape makes it easy to apply sensor to any smooth vertical surface. The alarm will sound if water bridges between the two contacts. The alarm can be a table, shelf, or wall-mounted away from the sensor.

For unattended filling of bathtubs, pools, spas, etc:
The sensor has suction cup and adhesive; use either to attach the sensor to any vertical surface. The buzzer will sound when the water reaches both metal contacts on the sensor

The post Sonin Water Alarm with Remote Sensor 00800 appeared first on Sonin Online Store.

Reference Guide

Product Brochure

New! Dual Remote Sensors will expand the area of coverage to detect the presence of water by placing 2 sensors up to 12 feet from each other

Detects water and sounds loud 110 dB alarm

Sensors can be placed up to 12 feet apart

New! Sensors have both suction cups and adhesive to secure in place

New! Includes wall mounting hardware

New! Install battery easily with slide and snap cover

New! Space saving design

Circuit test/reset button ensures system is working

Low battery signal tells user when it’s time to replace the battery

Warns of leaks and overflows in bath, kitchen, laundry, attic, basement, or anywhere there is a potential for leaks to occur.

Alerts user within hearing range that water has reached desired level when used to monitor the filling of pools, tubs, sinks, aquariums and more

An ideal backup system for sump and bilge pumps in residential, commercial and marine applications

For leak detection:
Just place the sensor at the lowest point of the floor or other horizontal surface where water collects. New adhesive tape makes it easy to apply sensor to any smooth vertical surface. The alarm will sound if water bridges between the two contacts. Alarm can be table, shelf, or wall mounted away from the sensor.

For unattended filling of bathtubs, pools, spas, etc:
Sensor has suction cup and adhesive; use either to attach the sensor to any vertical surface. The buzzer will sound when the water reaches both metal contacts on the sensor

The post Sonin Water Alarm with Dual Sensors 00802 appeared first on Sonin Online Store.

Reference Guide

Product Brochure

Detects water and sounds loud 110 dB alarm

Sensor and alarm can be placed up to 6 feet apart

New! Space-saving design

New! Install battery easily with slide and snap cover

New! The flat sensor is weighted and designed to use on horizontal surfaces such as floors, air conditioning pans, and under refrigerators and sinks, etc.

New! Includes alarm mounting hardware

New! Packaging designed to display on a peg hook

Circuit test button ensures the system is working

Low battery signal tells the user when it’s time to replace the battery

Warns of leaks and overflows in the bath, kitchen, laundry, attic, basement, or anywhere there is a potential for leaks to occur.

Alerts user within hearing range that water has reached the desired level when used to monitor the filling of pools, tubs, sinks, aquariums and more

An ideal backup system for sump and bilge pumps in residential, commercial and marine applications

For leak detection:
Just place the sensor at the lowest point of the floor or other horizontal surface where water collects. The new weighted flat sensor makes it easier to lay flat in place. The alarm will sound if water bridges between the two contacts. The alarm can be on a table, shelf, or wall-mounted away from the sensor

For unattended filling of bathtubs, pools, spas, etc:
The sensor has a suction cup and to secure to any flat vertical surface. The buzzer will sound when the water reaches both metal contacts on the sensor

The post Sonin Water Alarm with Flat Sensor 00701 appeared first on Sonin Online Store.